Why Regular Maintenance is Important for Whole House Water Filters
Water is essential to our lives, and having clean water at home is a basic necessity. Whole house water filters are an excellent investment towards keeping your family healthy, but it's crucial to maintain them regularly. Over time, sediment, minerals, and other pollutants may build up in the filter, resulting in decreased water pressure and efficiency. Neglecting maintenance can also lead to expensive and extensive repairs. In this article, we'll share some essential maintenance hacks for whole-house water filters to keep them running efficiently and avoid costly repairs.
Replace the Filter Regularly
The filter in a whole house water filtration system is the most critical component. Its job is to trap impurities and particles from the water. Over time, these impurities collect, and the filter gets clogged. When this happens, water pressure decreases, and the system cannot filter out pollutants effectively. To ensure that your whole house water filter works optimally, you should replace your filter at least once every six months. You can check your manufacturer's instructions to determine the recommended replacement interval.
Clean the Sediment Filter Regularly
It's not uncommon for sediment to build up in whole house water filtration systems, especially with well water. The sediment filter helps to remove these materials from the water supply. However, over time, the filter may become clogged, reducing water pressure and affecting the filtration system's efficiency. To clean the sediment filter, turn off the power to the system and release the pressure, then remove and clean the filter. It's advisable to clean the sediment filter regularly to avoid severe damage to your whole house water filtration system.
Inspect for Leaks
Whole house water filtration systems can develop leaks over time due to wear and tear. Leaks can lead to water damage and mold growth if not dealt with promptly. To prevent leaks, you should inspect your system regularly, checking for any signs of wear and tear, such as corrosion, rust, or water stains. You should also inspect the pipes and connections for signs of leaks, including dampness or mold growth.
Flush the System Regularly
Flushing your whole house water filter system regularly helps to remove any impurities that may have accumulated over time. This is especially important after a filter change to remove any air pockets and ensure optimal performance. You can easily do this by turning on each faucet in the house for a few minutes, allowing water to flow through the system.
Clean the Water Softener System
Water softeners are often used in whole house water filtration systems to remove hard water minerals such as calcium and magnesium. Over time, these minerals collect and form a scale in the water softener, affecting its efficiency. To clean the water softener, you can use a cleaning solution specifically designed for this purpose. Follow the manufacturer's recommendations for the cleaning process.
Test the Water Quality Regularly
It's essential to test the water quality regularly to ensure that your filtration system is working efficiently. You can use a water testing kit to check for minerals, bacteria, and other impurities in the water. If you notice any issues, you may need to change the filter or clean the sediment filter.
Check the Pressure Gauge
The pressure gauge in your whole house water filtration system indicates the system's water pressure. Over time, the gauge may become inaccurate, requiring calibration. To check the pressure gauge, turn off the incoming water supply and note the pressure reading. Then, turn on the water supply and compare the readings. If the readings are incorrect, you may need to recalibrate or replace the gauge.
Keep the System Covered
Whole house water filtration systems are often located outside the house, where they are exposed to the elements. To protect your system from damage, you should cover it with a weatherproof cover. The cover will prevent debris from accumulating in the system and protect it from the sun, wind, and rain.
Use Professional Plumbing Services
Maintaining a whole house water filtration system can be challenging, especially if you're not a plumbing expert. For more complex maintenance tasks, such as flushing the system or replacing the filter, it's advisable to seek professional plumbing services. Professionals have the skills and tools necessary to perform maintenance tasks efficiently and effectively.
Conclusion
Maintaining a whole house water filtration system is essential for keeping your water clean and healthy. Performing regular maintenance tasks such as replacing the filter, cleaning the sediment filter, inspecting for leaks, and testing the water quality can help keep your system running efficiently. By following the maintenance hacks shared in this article, you can ensure that your whole house water filter works optimally and avoid costly repairs.
Quote Inquiry
Contact us
